搜索:  
当前位置:首页 >> 科学研究 >> 学者介绍 >> 正文
北京化工大学杨卫民教授
2014-11-20  来源:中国聚合物网

代表性论文

2014

·Inter-jet Distance in Needleless Melt Differential Electrospinning with Umbellate Nozzles. 2014

·Effect of gate size on the melt filling behavior and residual stress of injection molded parts. 2014

·Polypropylene fibers fabricated via a needleless melt- electrospinning device for marine oil-spill cleanup 2014

2013

·Tug of war effect in melt electrospinning .2013

·Performance assessment in a tube with rotor–assembled strands mixed by spiral slot rotor and low flow resistance rotor. 2013

·Simulation of Circular Tubes Fitted With V Cut and Square Cut Rotors. 2013

·Differential Molding System for Micro Injection Molding of Thermoplastics. 2013

·Numerical study on thermo-hydraulic characteristics of turbulent flow in acircular tube fitted with helical blade rotors. 2013

·Heat transfer enhancement in the tube fitted with LefteRight helical blade rotors. 2013

·Heat transfer enhancement in a tube fitted with helical blade rotors with grooves. 2013

·Performance assessment in a tube with rotor–assembled strands mixed by spiral slot rotor and low flow resistance rotor..2013

2012

·Heat transfer enhancement in double-pipe heat exchanger by means of rotor-assembled strands . 2012

·Orthogonal Design Study on Factors Affecting the Degradation of Polylactic Acid Fibers of Melt Electrospinning. 2012

2011

·Heat transfer and friction characteristics of turbulent flow through plain tube inserted with rotor-assembled strands . 2011

·Filling-To-Packing Switchover Mode Based on Cavity Temperature for Injection Molding. 2011

·Dissipative particle dynamics simulation on the fiber dropping process of melt electrospinning. 2011

·Gas barrier and morphology characteristics of linear low-density polyethylene and two different polypropylene films. 2011

·Online measurement of rheological properties of polypropylene based on an injection molding machine to simulate the injection-molding process. 2011

·Development of internal circulation two-platen IMM for thermoplastic polymer.2011

2010

·Online pressure–volume–temperature measurements of polypropylene using a testing mold to simulate the injection-molding process . 2010

·Orthogonal design study on factors effecting on fibers diameter of melt electrospinning. 2010

2009

·On-line testing equipment of P-V-T properties of polymers based on an injection molding machine . 2009

·Multistep Analysis of the Mechanical Performance of an Air spring. 2009

·Melt electrospinning of low density polyethylene having a low melt flow index.2009

2008

·Miscibility, Morphology, Thermal, and Mechanical Properties of a DGEBA based Epoxy Resin Toughened with a Liquid Rubber. 2008

·Multistep analysis of the mechanical performance of an air spring. 2008

Laboratory inverstigation and commercial test for rotors-assembled strand applied in smooth tube. 2008

2007

·An implicit control-volume finite element method and its time step strategies for injection molding simulation. 2007

·Morphology, Dynamic mechanical and thermal studies on poly(styrene-c0-acrylonitrile) modified epoxy resin/galss fiber composites. 2007

2003

·Visual analysis of the flow behavior of core material in a fork portion of plastic sandwich injection molding . 2003

版权与免责声明:本网页的内容由中国聚合物网收集互联网上发布的信息整理获得的。内容如与实际情况相悖,请提出。未经本网同意不得全文转载、摘编或利用其它方式使用上述作品。
更多>>群英聚首
·姜伟 武汉纺织大学
·王志伟 广西大学
·段青山 广西大学
·唐林 重庆师范大学
·靳羽华 香港中文大学(深圳)
·闫凯 陕西科技大学
·何承恩 武汉纺织大学
·周健 中国科学院宁波材料所
·仇亚昕 扬州大学
·赵德鹏 沈阳工程学院
·郭铮铮 西安理工大学
·李静 西安理工大学
·江亮 四川大学